Typing glyphs on Linux

Since mid-2012, most Linux distributions with X11 have Dyalog APL keyboard support included with the distribution, using xkb, the X Keyboard Extension.

setxkbmap

The simplest way to set up an APL keyboard on Linux is with the following setxkbmap command. Enter the following in your terminal emulator of choice:

setxkbmap -layout us,apl -variant ,dyalog -option grp:switch

An explanation:

• -layout us,apl assigns us (U.S. English) to be the primary layout, whereas apl is secondary

• -option grp:switch assigns Right Alt to switch to the secondary apl layout when it is pressed, otherwise us is used

• -variant ,dyalog assigns the Dyalog APL variant to the apl layout which contains modifiations unique to the Dyalog language (Note the preceding comma)

A full list of keys that can be used to switch layouts is included in /usr/share/X11/xkb/rules/evdev.lst under the option category.

Note: these changes are not permanent; the user will have to select one of a myriad of methods to run the command on startup. Alternatively, if they use one of the desktop environments listed below, they can follow those instructions.

GNOME

GUI

1. Open the Activities menu; this is located in the top-left corner of a default GNOME 3 session (alternatively, use your Super key to open the Activities overlay):
   
2. Search for "startup." When the Startup Applications program is highlighted, press the Enter key to open it:
   
3. Select the Add button on the right-hand side:
   
4. Provide a name, enter your setxkbmap command, and click Add when finished:
   

Terminal

1. Navigate to ~/.config/autostart and create a .desktop with any name that will help you remember its function.
2. Add the following to the contents of your file, customizing to suit your needs:

   [Desktop Entry]
   Type=Application
   Exec=setxkbmap -layout us,apl -variant ,dyalog -option grp:switch
   Hidden=false
   NoDisplay=false
   X-GNOME-Autostart-enabled=true
   Name[en_US]=apl-keyboard
   Name=apl-keyboard
   Comment[en_US]=
   Comment=

LXDE

1. Prepend an @ to the setxkbmap command from above:
   

   @setxkbmap -layout us,apl -variant ,dyalog -option grp:switch

2. Add it as a line in your user's LXDE autostart file, located at:
   

   ~/.config/lxsession/LXDE/autostart

For Lubuntu versions up to and including 18.04 (before the LXQt split), the location of autostart is ~/.config/lxsession/Lubuntu/autostart.

LXQt

GUI

1. From your LXQt panel, navigate to Preferences → LXQt Settings → Session Settings; alternatively, enter lxqt-config-session in your terminal emulator. You will be greeted with the following window:
   
2. Select the LXQt Autostart dropdown (it will be highlighted as shown above) and click the Add button to display the following pop-up window:
   
3. Provide a name, enter your setxkbmap command, and click OK when finished.

Terminal

The above GUI approach merely creates a .desktop file in the user's ~/.config/autostart. Create your own file in the autostart directory whose contents are as follows, to replicate the functionality achieved through the GUI:

[Desktop Entry]
Exec=setxkbmap -layout us,apl -variant ,dyalog -option grp:switch
Name=apl-keyboard
OnlyShowIn=LXQt;
Type=Application
Version=1.0

MATE

GUI

1. Open your MATE menu (in the top-left corner of a default environment) and select Control Center at the bottom of the window:
   
2. Scroll down through the main window, and under the Personal category, select Startup Applications:
   
3. Click the Add button on the right-hand side:
   
4. Provide a name, enter your setxkbmap command, and click Add when finished:
   

Terminal

Navigate to ~/.config/autostart and create a .desktop with any name that will help you remember its function.

Add the following to the contents of your file, customizing to suit your needs:

[Desktop Entry]
Type=Application
Exec=setxkbmap -layout us,apl -variant ,dyalog -option grp:switch
Hidden=false
X-MATE-Autostart-enabled=true
Name[en_US]=apl-keyboard
Name=apl-keyboard
Comment[en_US]=
Comment=
X-MATE-Autostart-Delay=0

Xfce

A tutorial specific to Xfce's config files can be found at this GitHub repository.

Troubleshooting

Settings reverted during X Windows session

Since at least March 2020 there have been issues with setxkbmap settings being reset without user instruction under the X Windows System.

Below is a script written in Raku that continuously checks for this undesirable reset behavior and puts the intended settings back in place.

#!/usr/bin/env raku

# Small script to ensure that APL keyboard layout is still set in xkb settings.
# Note that this is a patch for some sort of deranged time-based reset of these
# settings that is happening at a lower level of the Xorg-based Linux user experience.
#
# It's not clear what is causing these resets but this script allows us to more
# or less not care about it and get on with our hacking.
#
# Released under Artistic License by John Longwalker 2020

my $total-checks = 0;
sub xkbmap-contains-apl() {
  $total-checks++;
  so qx{ setxkbmap -query | grep '^layout:.*\<apl\>' }; # shell-out is easy as usual in a Perl
}

my $total-resets = 0;
sub set-xkbmap-for-apl($key, $verbose) {
  say "Reset total is now {++$total-resets} -- {DateTime.now}"
  	if $verbose;
  my $xkb-settings = chomp qx{ setxkbmap -query };

  my ($layout, $variant, $options);
  if $xkb-settings ~~ /^^ "layout:" \s* $<layout>=(<.graph>*) $$/ {
  	$layout = $<layout>.Str;
  } else {
  	die "Aborting. The xkb settings do not specify any layout:\n$xkb-settings";
  }

  if $xkb-settings ~~ /^^ "variant:" \s* $<variant>=(<.graph>*) $$/ {
  	$variant = $<variant>.Str;
  }

  if $xkb-settings ~~ /^^ "options:" \s* $<options>=(<.graph>*) $$/ {
  	$options = $<options>.Str;
  }

  $layout  = ($layout, 'apl').join(',');
  $variant = $variant ?? ($variant, 'dyalog')
                      !! 'dyalog';
  $options = $options ?? ($options, "grp:$key").join(',') 
                      !! "grp:$key";
  my $invocation = "setxkbmap -layout $layout -variant $variant -option $options";
  say "Invocation: $invocation"
    if $verbose;
  qqx{ $invocation };
}

# You can use --interval, --key, and -v/--verbose on the command line.
sub MAIN(:$interval = 30, :$key = 'switch', :v($verbose) = False) {
  react {
    whenever Supply.interval($interval) {
      set-xkbmap-for-apl($key, $verbose)
        if not xkbmap-contains-apl;
    }

    whenever signal(SIGINT) {
      say "Reset a total of $total-resets out of $total-checks checks"
      	if $verbose;
      exit;
    }
  }
}