Logger: Managing Log Files

Logger is part of the CategoryAplTree project.

Overview

This class is designed to write log files as ANSI (default) or UTF-8 files.

You can create an instance without specifying any parameters at all but you might specify up to 6 parameters. Some but not all of these parameters can be changed later on as well.

By default an instance of the class creates a log file with the name "yyyymmdd.log". When a new day puts in an appearance this file is closed and a new one is opened automatically.

Instead of accepting the defaults you can also let the class create "yyyymm.log" files or even "yyyy.log".

Note that the main method, Log, does not do any kind of fancy formatting. It just accepts vectors of any kind as well as text matrices; performance is considered to be paramount. However, the method LogError is different and does some formatting.

Note that by default the class makes intense use of error trapping to make sure that neither Log nor LogError will ever effect the hosting application.

Encoding

Note that for ANSI files with the Unicode version of Dyalog all non-ANSI characters are replaced by "?".

Generally the encoding it determined by the interpreter. You can make sure that only ANSI chars are written to the log file by specifying "ANSI". "ANSI" might save you a bit space but normally not much since most characters in a log file are ANSI anyway.

"ASCII" was an option in earlier version of Logger, when the Classic version of Dyalog was still supported. However, now it deprecated. You may still specify it, but it will be converted to "ANSI" internally anyway.

The methods

The Log method

 {r}←Log msg 

Writes msg to the Log File. Note that msg must be either a character scalar or a simple character vector, otherwise it is ignored. Note that LogError gives your more freedom in this respect - see there.

r gets the message written to the log file together with the time stamp and thread no.

msg can be one of:

For best performance this function does not do any formatting. If you need a special formatting consider writing a cover function for Log or your own class deriving from Logger.

The LogError method

This method is useful to log an error. This is a cover function of Log.

You can specify 2-3 parameters:

  1. The return code. Single integer. 0 means that LogError should not do anything at all.

  2. The message (msg). This can be any array containig text or numeric data as long as the depth and rank are both lower than 3.
  3. More information (more); this is optional. This can be any kind of array.

In case rc ←→ 0, LogError is doing nothing at all. Otherwise it writes msg into the log file and marks it up as an error. msg can be simple, a matrix or a nested vector although simple is recommended. more can be any array.

If all is fine r is empty, otherwise it returns the message written to the log file.

That allows you to do something like this:

    MyLoggerInstance.LogError 1 'The error message' ⎕DM

or even:

    MyLoggerInstance.LogError rc 'FATAL ERROR' ('hello word' (1 2 3))

While the Log method is fairly restrictive in order to avoid any performance penalties the method LogError offers more freedom because this is hardly causing any harm: you won't have thousands of errors per second, and even if you have them performance is the least of your worries then.

Notes

Important defaults

By default a file "{yyyymmdd}.log" is created within "path" or opened if it already exists. When a new day comes along that file is closed and a new one is created.

This default behaviour can be switched off by setting autoReOpen to 0.

Error Trapping

By default all possible errors - accept invalid calls - are trapped withing the Log method: a logging mechanism cannot be allowed to break an application which it should support.

One exception: when creating an instance of ""Logger"" fails that causes a crash but that means it was called with invalid parameters.

However, by setting debug and/or printToSession and/or timestamp the Logger class can be debugged.

Preconditions

Logger needs the scripts APLTreeUtils and WinFile. While APLTreeUtils must be situated on the same level as Logger (because it is :Included), WinFile is expected to be found either on the same level as the Loggerscript or in # or in the namespace Logger got instantiated from.

If neither of this is appropriate one can specify a reference refToUtils pointing to the correct namespace.

Sample session

This code:

 myLogger←⎕NEW #.Logger
⍝ Exercise the "Log" method"
 myLogger.Log'this is my first entry!'
 myLogger.Log'Even' 'more' 'entries'
 myLogger.Log⊃'A' 'text' 'matrix'
 myLogger.Log 1 2 3
 myLogger.Log('String')(⍳6)('Another string')
 myLogger.Log(1 2)(2 3⍴⍳6) ⍝ causes an error (trapped!)
 {myLogger.Log'Log entry written in a thread'}&⍬
⍝ Exercise the "LogError" method
 msg←'An error has occured'
 rc←0
 myLogger.LogError rc msg  ⍝ This has no effect: rc is 0
 rc←2
 myLogger.LogError rc msg
 more←'A fatal error has occured'(20 1009)((1 2)'FATAL'(2 3⍴⍳6))
 myLogger.LogError rc msg more ⍝ "more" can be any array

Results in this log file:

2011-05-29 07:29:36 *** Log File opened                 
2011-05-29 07:29:36 this is my first entry!             
2011-05-29 07:29:36 Even                                
2011-05-29 07:29:36 more                                
2011-05-29 07:29:36 entries                             
2011-05-29 07:29:36 A                                   
2011-05-29 07:29:36 text                                
2011-05-29 07:29:36 matrix                              
2011-05-29 07:29:36 1 2 3                               
2011-05-29 07:29:36 String                              
2011-05-29 07:29:36 1 2 3 4 5 6                         
2011-05-29 07:29:36 Another string                      
2011-05-29 07:29:36 (2) Log entry written in a thread   
2011-05-29 07:29:36 *** ERROR RC=2; An error has occured
2011-05-29 07:29:36 *** ERROR RC=2; An error has occured
2011-05-29 07:29:36           A fatal error has occured 
2011-05-29 07:29:36           20 1009                   
2011-05-29 07:29:36            1 2  FATAL  1 2 3        
2011-05-29 07:29:36                        4 5 6        

Note that for the log entry written from its own thread the thread number is reported in the log file.

Constructors, fields, properties and methods

      ]ADOC.List Logger 
*** Logger (Class) ***

Constructors:
  make0
  make1(pathOrCommandSpace)
  make2(path_ encoding_)
  make3(path_ encoding_ filenameType_)
  make4(path_ encoding_ filenameType_ debug_)
  make5(path_ encoding_ filenameType_ debug_ timestamp_)
  make6(path_ encoding_ filenameType_ debug_ timestamp_ refToUtils_)
Instance Properties:
  active
  autoReOpen
  debug
  encoding (ReadOnly)
  errorCounter (ReadOnly)
  errorPrefix
  extension
  fileFlag
  filenameDescriptor (ReadOnly)
  filenamePostfix
  filenamePrefix
  filenameType
  filename (ReadOnly)
  path (ReadOnly)
  printToSession
  refToUtils
  timestamp
Instance Methods:
  Close
  r ← FullFilename
  {r} ← LogError y
  {r} ← Log Msg
Shared Methods:
  r ← Copyright
  r ← CreateParms
  r ← History
  r ← Version

Project page

For bug reports, future enhancements and a full version history see Logger/ProjectPage

General information

Original author:

KaiJaeger

Responsible:

KaiJaeger

Email:

kai@aplteam.com

License:

Free software

APLTree downloads

Using an APLTree member

  1. If you just want to consume (use) an APLTree member then you have several choices:
    • Note that accessing it via ftp allows you to download older versions as well while the dedicated download page offers just the most current version.

Contributing

If you want to contribute to an APLTree project see HowToContributeToTheAPLTreeProject for details.

Get the full project

If for some reason you need access to, say, the test cases then you need to get more then just the script (or application) itself.

HowToContributeToTheAPLTreeProject explains how to get a project onto your local machine. Just ignore any additional steps.

Create a new APLTree sub project

In order to create a new APLTree project you need some advice. Ask KaiJaeger for help: mailto:kai@aplteam.com


CategoryAplTree

Logger: Managing Log Files

Logger is part of the CategoryAplTree project.

Logger (last edited 2017-01-08 12:04:23 by KaiJaeger)